## swap矩阵数据对比


### Blade 1 pitch angle
![[Pasted image 20251029150028.png]]

### Measured shaft power

![[Pasted image 20251029150141.png]]

### Measured electrical power output
![[Pasted image 20251029150201.png]]

### Measured generator speed (rad/s)

![[Pasted image 20251029151906.png]]

###  Measured rotor speed (rad/s)

![[Pasted image 20251029151938.png]]

### Measured generator torque (Nm)

![[Pasted image 20251029152029.png]]

### Measured yaw error (rad) 

herowind没值
![[Pasted image 20251029152123.png]]

### Hub wind speed (m/s)
![[Pasted image 20251029152229.png]]
有点小小偏差，why

### Blade 1 root out-of-plane bending moment

![[Pasted image 20251029152327.png]]

### Blade 2 root out-of-plane bending moment
![[Pasted image 20251029152350.png]]

### Blade 3 root out-of-plane bending moment

![[Pasted image 20251029152412.png]]


root out of plane bending 、推力一开始就差值较大
### tower_top_acc_y 
![[Pasted image 20251029154600.png]]


### rotor azimuth

![[Pasted image 20251029144356.png]]

### Blade 1 root in-plane bending moment

![[Pasted image 20251029144631.png]]

### Blade 2 root in-plane bending moment
![[Pasted image 20251029144657.png]]

### Blade 3 root in-plane bending moment

![[Pasted image 20251029144720.png]]

### Rotating hub My
![[Pasted image 20251029144936.png]]
###  Rotating hub Mz
![[Pasted image 20251029145002.png]]

### Fixed    hub My

![[Pasted image 20251029145031.png]]


### Fixed    hub Mz

![[Pasted image 20251029145058.png]]

### Yaw bearing  My 

![[Pasted image 20251029145139.png]]

### Yaw bearing  Mz

![[Pasted image 20251029145213.png]]


### Shaft torque

![[Pasted image 20251029145739.png]]

### Thrust - Rotating low-speed shaft force x

![[Pasted image 20251029145843.png]]

### Nonrotating low-speed shaft force y

![[Pasted image 20251029145915.png]]


### Nonrotating low-speed shaft force z

![[Pasted image 20251029145932.png]]


# q


2 推力 out-of-plane bending moment偏大

推力 
```
let ls_shft_fxa = dot_product(&frc_p_rot, &m.coord_sys.e1);
y.lss_shft_fxa = ls_shft_fxa * 1000.0;

```

out-of-plane bending moment
```

    for k in 0..p.num_bl as usize {

        let root_mxc = dot_product(&mom_h0_b.slice(s![.., k]).to_owned(), &m.coord_sys.i1.slice(s![k, ..]).to_owned());

        y.root_mxc[k] = root_mxc * 1000.0;
```

Shaft torque