diff --git a/多体+耦合求解器/稳态停机载荷/Bladed.md b/多体+耦合求解器/稳态停机载荷/Bladed.md new file mode 100644 index 0000000..c4ce984 --- /dev/null +++ b/多体+耦合求解器/稳态停机载荷/Bladed.md @@ -0,0 +1,27 @@ + + +Steady parked loads (see 7.10): Loads on the parked turbine are calculated in steady wind. As the blade position is specified, the wind field need not be spatially uniform. +静止泊堆载荷（见 7.10）：泊置涡轮机的载荷计算基于稳态风速。由于叶片位置已确定，风场不必具有空间均匀性。 +# Steady parked loads calculation +This calculation generates wind turbine loads for a parked rotor in steady winds. This optionally includes blade, tower and other loads - see Output Control (see 7.21). +Use the Steady parked loads screen (see 7.5) to define the following parameters for the calculation: +• Steady wind speed: note that although the wind speed is steady, it need not be spatially uniform. +• Azimuth angle: the rotor azimuth position; zero means that blade 1 is pointing vertically upwards. +• Yaw angle: the nacelle angle measured clockwise from North, assuming that the wind is blowing from the North: see wind direction (see 6.9). +• Wind inclination: for non-horizontal wind flows (e.g. on the side of a hill). A positive value indicates a rising wind. +• Pitch angle: the pitch angle or aileron/flap/airbrake deployment angle - see Rotor (see 4.1). +The calculation also allows a sweep through any one of the four above angles, i.e. azimuth, yaw, wind inclination or pitch angle. Use Parameter to vary to define which angle will vary. The sweep start at the value specified above for that parameter. Specify End value to define the end of the sweep, and Step to define the step size. + +# 稳态停机载荷计算 + +此计算生成停机转子在稳态风中的载荷。 可选地，包括叶片、塔架和其他载荷 - 参见输出控制 (参见 7.21)。 + +使用“稳态停机载荷”屏幕 (参见 7.5) 定义以下参数： + +• 稳态风速：请注意，虽然风速是稳态的，但它不必在空间上均匀。 +• 方位角：转子的方位位置；零表示叶片 1 指向垂直向上。 +• 偏航角：从北向顺时针测量的吊舱角，假设风从北吹来 - 参见风向 (参见 6.9)。 +• 风倾角：用于非水平风流（例如，山坡上）。 正值表示风向上升。 +• 迎角：迎角或副翼/襟翼/气动刹车展开角 - 参见转子 (参见 4.1)。 + +该计算还允许对上述四个角度中的任何一个进行扫描，即方位角、偏航角、风倾角或迎角。 使用“参数变化”定义将变化的那个角度。 扫描从上述该参数的值开始。 指定“结束值”定义扫描的结束，并指定“步长”定义步长大小。 \ No newline at end of file diff --git a/多体+耦合求解器/Control of variable speed pitch turbine/auto/Control of variable speed pitch turbine.md b/多体+耦合求解器/稳态运行载荷/Control of variable speed pitch turbine/auto/Control of variable speed pitch turbine.md similarity index 100% rename from 多体+耦合求解器/Control of variable speed pitch turbine/auto/Control of variable speed pitch turbine.md rename to 多体+耦合求解器/稳态运行载荷/Control of variable speed pitch turbine/auto/Control of variable speed pitch turbine.md diff --git a/多体+耦合求解器/Control of variable speed pitch turbine/auto/Control of variable speed pitch turbine_origin.pdf b/多体+耦合求解器/稳态运行载荷/Control of variable speed pitch turbine/auto/Control of variable speed pitch turbine_origin.pdf similarity index 100% rename from 多体+耦合求解器/Control of variable speed pitch turbine/auto/Control of variable speed pitch turbine_origin.pdf rename to 多体+耦合求解器/稳态运行载荷/Control of variable speed pitch turbine/auto/Control of variable speed pitch turbine_origin.pdf diff --git a/多体+耦合求解器/Control of variable speed pitch turbine/auto/images/2f94874fe734e960bb63b3d4ac35e9033af86604ef84c74a6bba936f5c2941cd.jpg b/多体+耦合求解器/稳态运行载荷/Control of variable speed pitch turbine/auto/images/2f94874fe734e960bb63b3d4ac35e9033af86604ef84c74a6bba936f5c2941cd.jpg similarity index 100% rename from 多体+耦合求解器/Control of variable speed pitch turbine/auto/images/2f94874fe734e960bb63b3d4ac35e9033af86604ef84c74a6bba936f5c2941cd.jpg rename to 多体+耦合求解器/稳态运行载荷/Control of variable speed pitch turbine/auto/images/2f94874fe734e960bb63b3d4ac35e9033af86604ef84c74a6bba936f5c2941cd.jpg diff --git a/多体+耦合求解器/Steady 多体计算.md b/多体+耦合求解器/稳态运行载荷/Steady 多体计算.md similarity index 100% rename from 多体+耦合求解器/Steady 多体计算.md rename to 多体+耦合求解器/稳态运行载荷/Steady 多体计算.md diff --git a/多体+耦合求解器/steady power curve Operational loads 控制.md b/多体+耦合求解器/稳态运行载荷/steady power curve Operational loads 控制.md similarity index 100% rename from 多体+耦合求解器/steady power curve Operational loads 控制.md rename to 多体+耦合求解器/稳态运行载荷/steady power curve Operational loads 控制.md diff --git a/多体+耦合求解器/steady控制算法.excalidraw.md b/多体+耦合求解器/稳态运行载荷/steady控制算法.excalidraw.md similarity index 100% rename from 多体+耦合求解器/steady控制算法.excalidraw.md rename to 多体+耦合求解器/稳态运行载荷/steady控制算法.excalidraw.md diff --git a/多体+耦合求解器/转速变桨角控制曲线/图像 001.png b/多体+耦合求解器/稳态运行载荷/转速变桨角控制曲线/图像 001.png similarity index 100% rename from 多体+耦合求解器/转速变桨角控制曲线/图像 001.png rename to 多体+耦合求解器/稳态运行载荷/转速变桨角控制曲线/图像 001.png diff --git a/多体+耦合求解器/转速变桨角控制曲线/图像 002.png b/多体+耦合求解器/稳态运行载荷/转速变桨角控制曲线/图像 002.png similarity index 100% rename from 多体+耦合求解器/转速变桨角控制曲线/图像 002.png rename to 多体+耦合求解器/稳态运行载荷/转速变桨角控制曲线/图像 002.png diff --git a/多体+耦合求解器/转速变桨角控制曲线/图像 003.png b/多体+耦合求解器/稳态运行载荷/转速变桨角控制曲线/图像 003.png similarity index 100% rename from 多体+耦合求解器/转速变桨角控制曲线/图像 003.png rename to 多体+耦合求解器/稳态运行载荷/转速变桨角控制曲线/图像 003.png diff --git a/多体+耦合求解器/转速变桨角控制曲线/图像 004.png b/多体+耦合求解器/稳态运行载荷/转速变桨角控制曲线/图像 004.png similarity index 100% rename from 多体+耦合求解器/转速变桨角控制曲线/图像 004.png rename to 多体+耦合求解器/稳态运行载荷/转速变桨角控制曲线/图像 004.png diff --git a/多体+耦合求解器/转速变桨角控制曲线/图像 005.png b/多体+耦合求解器/稳态运行载荷/转速变桨角控制曲线/图像 005.png similarity index 100% rename from 多体+耦合求解器/转速变桨角控制曲线/图像 005.png rename to 多体+耦合求解器/稳态运行载荷/转速变桨角控制曲线/图像 005.png diff --git a/多体+耦合求解器/转速变桨角控制曲线/图像 006.png b/多体+耦合求解器/稳态运行载荷/转速变桨角控制曲线/图像 006.png similarity index 100% rename from 多体+耦合求解器/转速变桨角控制曲线/图像 006.png rename to 多体+耦合求解器/稳态运行载荷/转速变桨角控制曲线/图像 006.png diff --git a/工作OKRs/25.2-5 OKR.canvas b/工作OKRs/25.2-5 OKR.canvas index a095bfa..78c732c 100644 --- a/工作OKRs/25.2-5 OKR.canvas +++ b/工作OKRs/25.2-5 OKR.canvas @@ -1,10 +1,10 @@ { "nodes":[ {"id":"b698e88ca5fb9c51","type":"text","text":"状态指标：\n推进OKR的时候也要关注这些事情，它们是完成OKR的保障。\n\n\n效率状态 green","x":-96,"y":80,"width":456,"height":347}, - {"id":"2b068bfe5df15a72","type":"text","text":"# 目标：多体动力学模块完善\n### 每周盘点一下它们\n\n\n关键结果：建模原理、建模方法掌握 （7.5/10）\n\n关键结果：对标Bladed模块完成 （8/10）\n\n关键结果：风机多体动力学文献调研情况完成 （5.5/10）","x":-96,"y":-307,"width":456,"height":347}, + {"id":"2b068bfe5df15a72","type":"text","text":"# 目标：多体动力学模块完善\n### 每周盘点一下它们\n\n\n关键结果：建模原理、建模方法掌握 （8/10）\n\n关键结果：对标Bladed模块完成 （8.5/10）\n\n关键结果：风机多体动力学文献调研情况完成 （5.5/10）","x":-96,"y":-307,"width":456,"height":347}, {"id":"01ee5c157d0deeae","type":"text","text":"# 推进计划\n未来四周计划推进的重要事情\n\n文献调研启动\n\n建模重新推导\n\n\n","x":-620,"y":80,"width":456,"height":347}, - {"id":"58be7961ae7275a7","type":"text","text":"# 计划\n这周要做的3~5件重要的事情，这些事情能有效推进实现OKR。\n\nP1 必须做。P2 应该做\n\n\nP1 柔性部件 叶片、塔架主动力惯性力算法\n- 变形体动力学 简略看看ing\n- 浮动坐标系方法 如何用于梁模型 Q 问孟航\n- 柔性梁弯曲变形振动学习，done 但对于公式不太懂\n- 如何静力学求解\n\nP1 Steady Operational Loads求解器测试 \n- 两个结合点测试 完成\n\nP2 结合yaml解析代码 暂缓，需要新的yaml文件\n\nP1 simpack多体对CAE的需求梳理 分成塔架、叶片、传动链模型\n\nP2 yaw 自由度再bug确认 已知原理了\n\n","x":-614,"y":-307,"width":450,"height":347}, - {"id":"cb9319d24c3e70e3","type":"text","text":"# 5月已完成\n\nP1 Steady Operational Loads求解器测试 \n- 变桨算法测试完成\n- 转速算法基本完成","x":-240,"y":520,"width":440,"height":560}, + {"id":"58be7961ae7275a7","type":"text","text":"# 计划\n这周要做的3~5件重要的事情，这些事情能有效推进实现OKR。\n\nP1 必须做。P2 应该做\n\n\nP1 柔性部件 叶片、塔架主动力惯性力算法 主线\n- 变形体动力学 简略看看ing\n- 浮动坐标系方法 如何用于梁模型 \n\t- Q 问孟航 不用浮动坐标系\n- 柔性梁弯曲变形振动学习，主线 \n\t- 广义质量 刚度矩阵及含义\n- 如何静力学求解\n\t- 基于本构方程 读孟的论文\n\t\nP1 建立IEA 15yaml文件\nP1 结合yaml解析代码，联合气动更新对yaml文件的支持\nP1 结果对比\n- 优先瞬态\n\nP1 如何优雅的存储、输出结果。\nP1 开发板联系\nP2 yaw 自由度再bug确认 已知原理了\n\n","x":-614,"y":-307,"width":450,"height":347}, + {"id":"cb9319d24c3e70e3","type":"text","text":"# 5月已完成\n\nP1 Steady Operational Loads求解器测试 \n- 变桨算法测试完成\n- 转速算法基本完成\n- 两个结合点测试 完成\n\nP1 simpack多体对CAE的需求梳理 分成塔架、叶片、传动链模型 完成","x":-240,"y":520,"width":440,"height":560}, {"id":"1ebeabaf5c73ddbb","type":"text","text":"# 4月已完成\n\n多体原理学习 YouTube课程 018\n\n气动模块联合调试，跑通\n\n使用python搭建风电机组多体模型 刚性部件主动力、惯性力计算 \n\n编写Steady Operational Loads求解器\n- 稳态工况多体动力学求解方法 --龙格库塔+ed_caloutput 初步方案完成\n- 遍历风速框架 完成\n- 不同风速下转速、变桨角度算法 完成\n- 多体设置参数 完成\n- 每个风速直接是否需要重新初始化 需要 完成\n\n\n\ngenerator torque计算 简单了解，确定方案","x":-720,"y":520,"width":440,"height":560} ], "edges":[] diff --git a/工作总结/周报/周报76-郭翼泽.docx b/工作总结/周报/周报76-郭翼泽.docx index b4436ff..4841d6e 100644 Binary files a/工作总结/周报/周报76-郭翼泽.docx and b/工作总结/周报/周报76-郭翼泽.docx differ diff --git a/工作总结/周报/周报77-郭翼泽.docx b/工作总结/周报/周报77-郭翼泽.docx new file mode 100644 index 0000000..76c15e4 Binary files /dev/null and b/工作总结/周报/周报77-郭翼泽.docx differ